Top 10 Rated case club waterproof 4 pistol case with silica gel in 2022 Comparison Table
Bestseller No. 1
Case Club PlayStation 4 & PS4 Slim/Pro Portable Gaming Station with Built-in 24" 1080p Monitor, Storage for Controllers, Games, and Included Speakers (PS4 & Accessories Not Included) Gen 2
- 🎮Case fits PS4, PS4 Slim, PS4 Pro (not included) along with 3 controllers and 9 games (not included)
- 🎮Case comes with 24" monitor, removable external speakers, and customized foam
- 🎮Monitor Specs: Resolution 1080p, Response Time 8ms (5ms GtG), Refresh Rate 60 Hz, Aspect Ratio 16:9, 178 Degree Viewing Angle, Brightness Intelligence Adaptive Technology
- 🎮Case is padlockable, wheeled, has lid stays for adjustable viewing angle, games can be unloaded and loaded without console removal. Games can be played without removing the console.
- 🎮Does not fit PS2,PS3, nor PS5. The case just fits the PS4 Original, PS4 Slim and PS4 Pro models. PS4 console, controllers, and games NOT included. Case weighs 35 lbs fully loaded. Patented.
Bestseller No. 2
Case Club Xbox One X/S Portable Gaming Station with Built-in 24" 1080p Monitor, Storage for Controllers, Games, and Included Speakers (Xbox & Accessories Not Included)
- 🎮Case fits Xbox One X or Xbox One S (not included) along with 2 controllers and 8 games (not included)
- 🎮Case comes with 24" monitor, removable external speakers, and customized foam
- 🎮Monitor Specs: Resolution 1080p, Response Time 8ms (5ms GtG), Refresh Rate 60 Hz, Aspect Ratio 16:9, 178 Degree Viewing Angle, Brightness Intelligence Adaptive Technology
- 🎮Case is, padlockable, wheeled, has lid stays for adjustable viewing angle, games can be unloaded and loaded without console removal. Games can be played without removing the console.
- 🎮Does not fit original Xbox One, nor the new Xbox Series models. Console, controllers, and games NOT included. Case weighs 35 lbs fully loaded. Patented.
Bestseller No. 3
Case Club 5 Pistol and 20 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2)
- Holds 5 pistols, 20 magazines (+5 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 5 pistol version to a 4 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear. Quickly convert it back to the 5 pistol version anytime by putting the module back in. Dual purpose foam design allows for two different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
Bestseller No. 4
Case Club AR15 Pre-Cut Carrying Case
- Holds a single AR-15 Rifle with collapsible stock, along with a semi-auto pistol or revolver, extra rifle and pistol magazines, and accessories
- Will also accommodate optics and underbarrel attachements on the rifle and underbarrel attachments on the pistol (does not accomodate side attachments or fixed/pinned/full stocks)
- All the foam is Pre-Cut (see line drawing) so you get a custom foam fit at non-custom pricing!
- Foam insert is (closed cell) high grade polyethylene which can be wiped clean
- Built in padlockable holes for extra security. Case will not fit .308 mags. Rifle, pistol, and accessories not included. Case is not waterproof.
Bestseller No. 5
Case Club 6 Pistol and 21 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2)
- Holds 6 pistols, 21 magazines (+6 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 6 pistol version to a 5 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear. Quickly convert it back to the 6 pistol version anytime by putting the module back in. Dual purpose foam design allows for two different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
SaleBestseller No. 6
Case Club Customizable (PE) Polyethylene Foam 12" x 12" x 1.5"
- Military Grade Polyethylene foam measuring12 x 12 x 1.5 inches
- Closed-cell, non-abrasive, and has excellent shock absorption & vibration dampening properties
- The foam has good elasticity & tear resistance
- Easily cut to shape with razor blade or house hold knife
Bestseller No. 7
Case Club 3 Pistol & Accessory & Up to 23 Magazines Pre-Cut Waterproof Case with Silica Gel to Help Prevent Gun Rust (Gen 2)
- Holds 3 pistols and (up to) 23 magazines with magazine modules or 9 magazines with accessory pocket (+3 more in the magwells). Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 3 pistol & accessory version to a 3 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 17 while adding both modules increases it to 23. Quickly convert it back to the 3 pistol & accessory version anytime by removing the modules. Dual purpose foam design allows for three different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
Bestseller No. 8
Case Club 24 Magazine Holder .50 Cal Ammo Can Foam (Pre-Cut, Closed Cell, Military Grade Foam) (1 Count)
- Foam only, ammo can is NOT included with order, Foam Dimensions: 11"x5.625"
- Holds 24 magazines (both single stack & double stack)
- Foam insert is (closed cell) military grade polyethylene which can be wiped clean
- Set includes 3 pieces. Soft lid foam, denser base foam with cutouts, dense flatpad for the bottom
Bestseller No. 9
Case Club 8 Pistol and 12 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust
- Holds 8 semi-auto pistols, 12 magazines (+8 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths.
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
- Case is ideal for police departments, military, firearm instructors & those who have large pistol collections.
Bestseller No. 10
Case Club 6 Pistol & 20 Magazine Case with Accessory Pocket. Pre-Cut, Heavy Duty, Waterproof, with Silica Gel for Gun Rust Prevention (Upgraded Gen-2)
- Holds 6 pistols and (up to) 20 magazines with magazine modules or 8 magazines with accessory pocket (+6 more in the magwells). Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 6 pistol & accessory version to a 6 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 12 while adding both modules increases it to 20. Quickly convert it back to the 6 pistol & accessory version anytime by removing the modules. Dual purpose foam design allows for three different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
Are you looking for top 10 good case club waterproof 4 pistol case with silica gel for the budget in 2022? Our team had scanned more than 95,114 customer satisfaction about top 10 best case club waterproof 4 pistol case with silica gel in 2022, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:
Our Best Choice: Case Club IWI Tavor TS12 Shotgun Cases
Our rating: (4.9 / 5)
(4.9 / 5)[ad_1]
Product Description
Heavy Duty Protection – Upgraded Gen 2 Design
Engineered durability that will perform under the most harsh conditions. Small footprint & light weight design maximizes available space ensuring mobility, even in rough terrain.
Durable Case Shell with Stainless Steel Hardware
Impervious to rust & corrosion from salt water & solvents.
100% Waterproof
Rugged case design is IP67 rated & can be submerged without water penetration.
100% Dustproof
Heavy duty gasket keeps dust, debris & particulates out.
O-Ring Seal Built Into the Lid
Rubber gasket keeps water and dirt out making the case fully waterproof and ready for action.
Non-Slip Hard Rubber Tilt Wheels
Wide bodied dual edge wheels with stainless steel ball bearings will glide smoothly over flat and rough terrain.
4 Padlock Points For Security
Case is padlockable using a lock with 0.3″ shackle diameter. (locks not included)
Built in Pressure Release System
A pressure release valve located in the front of the case allows you to equalize the atmospheric pressure with varying altitudes.
Watertight Gasket Seal
Stainless Steel Hinge Pin
Multiple Padlock Points
Manual Purge Valve
Exterior Case Dimensions
Exterior Dimensions
Date First Available‏:‎July 20, 2022
Manufacturer‏:‎Case Club
ASIN‏:‎B099XDP9PN
Fits IWI Tavor TS12, 1 Semi-Auto Pistol or Snub Nose Revolver, 4 Pistol Magazines, and up to 42 Extra Shotgun Shells (or accessories)
Includes 1 Hydro-Absorbent Silica Gel to help prevent gun rust and 1 small waterproof Accessory Box
Has built-in metal reinforced padlockable holes, wheels, and a manual pressure relief valve
Case comes with a Lifetime Warranty
