Top 10 Best sata paint gun

Top 10 Best sata paint gun in 2021 Comparison Table

Bestseller No. 1
SATA SAT209874 SATAjet 5000 B RP Standard Gun (1.3 with RPS Cups)
  • Optimized nozzle concept for highest possible versatility concerning inlet pressure and spray distance
  • Pearl chrome surface for easy cleaning, corrosion-resistant
  • Optimized half-turn spray fan control
  • Safely positioned trigger sleeve – for easy, safe and quick insertion of the paint needle
Bestseller No. 2
Iwata IWA5660 1.3MM LPH400-134LVX Gun
  • Engineered to provide increased productivity in application for solvent or Waterborne basecoat
  • The LPH400 LVX handles all the middle range colors where productivity and speed is a must
  • Has an Ultra smooth application
Bestseller No. 3
SATA SAT210765 SATAjet 5000 B HVLP Standard Gun (1.3 with RPS Cups)
  • Optimized nozzle concept for highest possible versatility concerning inlet pressure and spray distance
  • Pearl chrome surface for easy cleaning, corrosion-resistant
  • Optimized half-turn spray fan control
  • Safely positioned trigger sleeve – for easy, safe and quick insertion of the paint needle
SaleBestseller No. 4
SaleBestseller No. 6
Iwata LPH80-124G Gun/Cup(PCG2D-1)
  • LPH80 Miniature HVLP Spray Gun IWA-4931
Bestseller No. 7
SATA minijet 4400 B HVLP Spray Gun 1.2 SR RPS Cups 198184 (Open Box)
  • Small and Compact: Particularly suitable for smaller areas or hard to reach places
  • Special spot repair nozzle sets for minor damage repairs to vehicles
  • Low maintenance, self-tensioning air piston and paint needle packing
  • Low maintenance, self-tensioning air piston and paint needle packings
  • HVLP paint spray guns achieve particularly high transfer rates with their low-pressure technology
Bestseller No. 8
ANEST IWATA KIWAMI4-13BA4 1.3mm Spray Gun without Cup
  • Suggested air pressure is 1.0 to 3.5 bar (29 to 50 PSI)
  • Orifice 1.3 mm
  • Air & fluidConnection: Air G1/4(NPS1/4)/ FluidG1/4(NPS1/4)
  • Paint Cup is sold separately

Are you searching for top 10 good sata paint gun for the money in 2021? We had scanned more than 33,266 customer satisfaction about top 10 best sata paint gun in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: NANPU DFR-04 1/2″ NPT Air Drying System – Double Air Filters, Air Pressure Regulator Combo – Semi-Auto Drain, Poly Bowl


Our rating:4.7 out of 5 stars (4.7 / 5)





[ad_1]

Product Description

pneumatic  compressed air regulator filter lubricator water trap separator dryer 1/4 3/8 1/2 nptpneumatic  compressed air regulator filter lubricator water trap separator dryer 1/4 3/8 1/2 npt

11

NANPU 1/2″ NPT Air Drying System – Double Air Filters, Air Pressure Regulator Combo

Double air filters is designed to remove most liquid and solid particles from the air supply,more cleaner than ordinary single filter. The Self-Relieving Pressure Regulator is used to adjust the outlet pressure.

22

Brand Package & Foam Box

The original packaging and foam box give the product better protection, prevent any damage that may have occurred during transit.

33

Accessories

Air Coupler& Plug Kit, Thread Seal Tape and Fittings as additional accessories to bring more convenience to your installation.

44

User’s Manual

For more details about this product, please refer to the user‘s manual.

11

Filters/Regulator

22

Brand Package & Foam Box

33

Accessories

44

User’s Manual

Installation and Operating:

stpe1stpe1

stpe2stpe2

stpe3stpe3

Stpe4:Stpe4:

Preparation

The assembly of all calibration shall meet the maximum flow requirement.

Please clean the port and fitting before installation, it will effectively avoid bring dust to the air path.

Pay attention to direction of air flow and arrow pointing on product body if correct, minding port and thread size if match.

Pressure Adjustment

Pull up the knob of pressure gauge, rotate:

If you do clockwise rotation, pressure will rise steadily.Pressure will down when you rotate counterclockwise.

Stop turning after reaching the required index and lock down the knob,forget this step you may face leakage problem.

Dial Reading

Make sure that the pressure gauge is tightly installed on the main body, and pay attention to whether the reading rises and falls smoothly while adjusting pressure.

Drainage

Drainage column will automatic excrete if there is no pressure,and it will close during the air flow passing. When the water level is beyond upper limit, drainage is necessary, otherwise that will cause poor dehumidification.

Notice:

Please use a wrench to tighten fittings to avoid leakage.

The first installation may have an excretion reaction ( Not leakage, for the first time the internal pressure is different from the outside, it is necessary to discharge the excess air first ) In this case, please patiently wait for a while and it will work well.

Series

AR4000-04

AF4000-04

AW4000-04

AWF4010

AC4010-04

AC4000-04

Port Size

1/2″ NPT

1/2″ NPT

1/2″ NPT

1/2″ NPT

1/2″ NPT

1/2″ NPT

Air Flow

212 SCFM

141 SCFM

141 SCFM

105 SCFM

105 SCFM

141 SCFM

Temperature Range

41-140 °F

41-140 °F

41-140 °F

41-140 °F

41-140 °F

41-140 °F

Max Inlet Pressure

145 psi

145 psi

145 psi

145 psi

145 psi

145 psi

Regulator Pressure Range

0-145 psi

0-145 psi

0-145 psi

0-145 psi

0-145 psi

0-145 psi

Filter Rating

5 Micron

5 Micron

5 Micron & 0.5 Micron

5 Micron

5 Micron

Drain

Semi-Auto

Semi-Auto

Semi-Auto

Semi-Auto

Semi-Auto

Bowl Material

Polycarbonate w/ guard

Polycarbonate w/ guard

Polycarbonate w/ guard

Polycarbonate w/ guard

Polycarbonate w/ guard

TECHNOLOGY CHANEGS LIFE & TECHNOLOGY CHANGED BY NANPU

pneumatic  compressed air regulator filter lubricator water trap separator dryer 1/4 3/8 1/2 nptpneumatic  compressed air regulator filter lubricator water trap separator dryer 1/4 3/8 1/2 npt

NANPU PNEUMATICNANPU PNEUMATIC

NANPU – Dedicate to F. R. L

After more than 30 years of development, NANPU Pneumatic has a professional air power system design and production team to provide customers with high quality and services. Since clean air is indispensable part in many fields of industry for all kinds of equipment and tools, NANPU F.R.L (Air Filter, Air Regulator, Air Lubricator and their combinations) can make your air supply safer and more efficient. We provide customized products and services for your various needs.

Package Dimensions‏:‎10.59 x 9.06 x 4.09 inches; 5.25 Pounds
Item model number‏:‎DFR-04
Date First Available‏:‎October 15, 2019
Manufacturer‏:‎NANPU
ASIN‏:‎B07Z5Q52DN

1/2″ NPT Piggyback Air Filters/Regulator Combo
Double 5 Micron Brass Filter Element, Excellent Filtering Performance, Much Longer Life and Reuse Feasibility
Max Supply Pressure:145 psi; Operating Pressure: 0-145 psi
Temperature Range: 41-140℉ (5-60℃);Flow Rate: 105 SCFM (3000 L /Minute)@ 90 PSI
Includes Semi-Auto Drain & Polycarbonate Bowl with Metal Guard, 0-150 Gauge & Bracket,a pair of Air Coupler& Plug Kit, 2 x 1/2″ NPT Fittings, 1 x Thread Seal Tape

Leave a Comment